Properties of Gigantochloa scortechinii Paper Enhancement by Beating Revolution

Authors

  • Nurul Husna Mohd Hassan Department of Wood Industry, Faculty of Applied Sciences, Universiti Teknologi MARA Pahang, 26400 Bandar Tun Abdul Razak, Jengka, Pahang, Malaysia.
  • Suhaimi Muhammed Bio-composite Technology Department, Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia.
  • Rushdan Ibrahim Pulp and Paper Programme, Forest Research Institute Malaysia (FRIM), 52109 Kepong, Selangor, Malaysia.

DOI:

https://doi.org/10.47253/jtrss.v2i2.497

Keywords:

Bamboo paper making, Gigantochloa scortechinii, paper mechanical properties, beating revolutions, soda-AQ pulping

Abstract

The effect of bamboo portions and beating revolution on paper made from Gigantochloa scortechinii was determined. The bamboo was pulped using soda- anthraquinone (AQ) pulping comparing two pulping conditions (alkali 15 & 20%, temperature 160 & 170°C) for different bamboo portions consisted of top, middle and bottom. Hand sheets from unbeaten bamboo paper were made and the tensile index, tearing index, bursting index and folding endurance ranged from 16.35 - 32.54 Nm/g, 9.6 - 13.45 mN.m2/g, 0.81 - 1.54 kPa.m2/g and 3 - 9 double folds respectively. After that the bamboo pulp went through beating process and the tensile, tearing and bursting index and folding endurance for bamboo paper rose tremendously from 41.23 - 83.9 Nm/g, 16.64 - 27.13 mN.m2/g, 2.58 - 6.67 kPa.m2/g and 48 - 1769 double folds respectively. This revealed that bamboo paper strength can be enhanced by beating process without adding any additives.

Downloads

Published

2014-11-27

How to Cite

Mohd Hassan, N. H. ., Muhammed, S. ., & Ibrahim, R. . (2014). Properties of Gigantochloa scortechinii Paper Enhancement by Beating Revolution. Journal of Tropical Resources and Sustainable Science (JTRSS), 2(2), 59–67. https://doi.org/10.47253/jtrss.v2i2.497